# Aero devices | Specifications and development

Source: https://rexzen.si/devices/

Screened fit prototype

Aero Locket

A watch when you need a screen. A locket when you want it covered.

The same touch display and voice controls fit a watch strap, pendant, keyring, or shirt clip. A satin-metal lid flips open or lifts off with its collar.

          Try the prototype
          See specifications
          Open Locket lab

CAD renderings1.69-inch touch display

      Watch and mounts
      Smart glasses
      Aero Signal
      Aero ecosystem
      Voice workflow
      Simulator
      Specifications
      Comparison
      Development

One core. Four ways to carry it.

Try the 108° hinge, lift off the upper case, and switch mounts. The watch interface uses example data and its demo alarm uses a visible indicator.

        Watch
        Pendant
        Keyring
        Clip

          Rotate in 3D

Watch saddle with a 22 mm strap interface. The metal upper case is removed.

        Open lid
        Refit metal case
        Reset view
        Close 3D

Try the screen

          AEROPhone linked · 78%

Thursday, 14 May

            10:09

Review studio notes at 10:30

Lid closed

        Clock
        Today
        Timer
        Voice
        Activity
        Find

    Download screened fit kit
    Download GLB
    Read the engineering brief
    Get the drawings and part labels
    Download the parts list
    Download bench electronics

R02 fit prototype

Aero Glasses

Rounded rims, clear lenses, and a flush camera window. The 135.2 mm frame puts the service access on the temples and leaves processing to a phone or laptop.

          Rotate in 3D

R02 CAD fit model with clear lens gauges and separate camera and light windows.

        Front
        Back
        Reset view
        Close 3D

Built around the wearer

        Everyday fit49.4 mm nominal lens width, a 19.2 mm bridge and tapered temples. The clear lenses are fit gauges.
        Service accessLow-profile doors open into the temples. The USB bench evaluates the independent capture permit and the outward light.
        Phone-first processingThe software design keeps short voice requests local when possible and asks before a supported cloud handoff.

The CAD establishes fit. Optics, battery life, capture quality, weight, and comfort need a measured prototype.

    Explore the display-capable Aero View concept
    Download Glasses fit kit
    Download GLB
    Read the engineering brief
    Get the drawings and part labels
    Download bench electronics

      Reference points for testing Aero Glasses
      DeviceStrength to testPublished status

        Aero Glasses R02Serviceable temples, flush capture hardware and a phone-first design.Fit prototype. Camera, optical and power targets require measurement.
        Ray-Ban Meta Gen 312 MP camera and up to 3K video at 30 fps.Commercial. Up to nine hours of use in the manufacturer’s test.
        Meta Ray-Ban Display600 × 600 right-eye display with readable heads-up content.Commercial. Up to six hours of use in the manufacturer’s test.
        Even G2Binocular waveguides in frames measuring about 132 mm hinge to hinge.Commercial. Aero uses it as an everyday-fit reference.

Reference measurements vary by frame and use. Ray-Ban specifications · Even G2 specifications

Earlier glasses revisions
Download R01 shutter and folding study

Bench research · EEG

Aero Signal

An over-ear fit model for non-invasive EEG research. Run an artificial signal through the same analysis in a phone or laptop browser.

Inert fit model. Removable sensor guides leave room to test placement on a headform.

Check a signal window

Each example contains 500 artificial samples. No network, microphone, account, or EEG headset is required.

        Bench signal

            10 Hz test signal
            Power-line contamination
            Missing sample
            Clipped signal

        Analyze locally

Import a bench CSV
500 rows at 250 Hz, with headers seq,uv

    Open the 16-channel Signal lab
    Download Signal fit kit
    Download 3D model
    Read the EEG study plan
    Download bench electronics and source

From request to review

The proposed wearable brings a short voice request into the Aero workspace. Say, “Remind me to send the lab notes at six,” then review the suggested reminder on your phone.

01
Request

Hold a request control to capture a short clip. The design calls for a visible recording indicator and an independent mute.

02
Review

Check the draft on the phone. Aero can use context you have made eligible and the model you choose.

03
Decide

Approve the proposed reminder, revise it, or discard it. Aero already supports reviewed actions in the workspace.

    See how action review works today

Voice link simulator

Follow a synthetic clip from the Locket to a review screen. Change the route or interrupt the link to see what the phone would keep or discard.

The interactive simulator needs JavaScript. The engineering brief describes the protocol and its fault cases.

          Processing

              On the phone
              Cloud with review

          Test condition

              Connected
              Mute engaged
              Recording light failure
              Link lost mid-clip
              Missing audio packet

          Run simulation

LocketRequest key and recording light

LinkBounded, ordered audio frames

PhoneTranscription and route selection

AeroDraft and review

Example draft: Remind me to send the lab notes in 20 minutes.

          Open the draft in Aero

          Speech distance 0.5 m

Ideal free-field level change. This excludes wind, fabric, room reflections, and microphone processing.

Device specifications

Measurements come from the fit assemblies. The original Desk Dock has its own mounting geometry.

Screened Locket

            Closed envelope39.48 × 48.30 × 14.15 mm
            Reference display1.69-inch touch, 240 × 280 px
            Hinge travel108°
            Strap interface22 mm
            Mic separation18 mm between ports

The cover and mounts come off independently. The watch saddle leaves space for a wrist-facing optical sensor.

Original Desk Dock

            Body74 × 62 × 13.8 mm
            Recess33.2 × 45.2 mm
            Depth4.9 mm
            Cradle clearance0.60 mm per side
            Print partOne-piece cradle

CAD checks cover a centered 25 mm approach and contact with the cradle floor.

Aero Glasses R02

            Frame width135.2 mm
            Lens gauges49.4 × 38.07 mm
            Bridge19.2 mm
            Hinge to hinge131.1 mm
            Depth from front138.26 mm

The fit model includes flush sensor windows and removable temple covers.

Aero Signal R01

            Assembly envelope199 × 183.5 × 75 mm
            Outer cup75 × 92 mm
            Sensor placementFour guide positions per ear

The printed parts are for inert fit and assembly checks. Signal analysis uses its own artificial source.

        Get the CAD files
        Download mount studies
        Download the engineering brief

What Aero is designed to do differently

Aero Locket brings a glanceable screen, interchangeable mounts, and a lid into the same design as a short voice request. The paired phone is where you review changes to your workspace.

        Aero Locket design and two reference wearables
        DeviceDocumented workflowHardware status

            Aero Locket
            Watch and accessory modes with a shared display and voice core. Aero on Android can already turn a short clip into a reviewed draft.
            Digital fit model and screen simulator. Hardware development follows the existing development-board bench.

            Plaud NotePin S
            Tactile recording control with transcripts, summaries, and follow-up workflows in the Plaud app.
            Commercial wearable with a charging dock and several ways to wear it.

            Omi
            Conversation capture, transcription, and app integrations.
            Consumer wearable with published firmware, mechanical STEP files, and hardware design materials.

Comparison based on Plaud and Omi’s published documentation, checked 12 November 2026.

What gets tested next

Use the lab kit to test the electronics and phone handoff alongside the enclosure fit files.

Print and fit

Measure the rail and screw fits, and cycle the hinge, collar, and mounts for binding and wear.
CAD travel checked

Capture and mute

The firmware gates the microphone on a secure link and a held button. Measure the actual indicator, mute response, and throughput on the bench.
Development-board firmware

Phone and Aero

The Android lab transcribes a short WAV or completed Bluetooth clip into an editable draft. Test pairing and the full handoff on a phone.
Android developer preview

Wear and power

Measure retention, comfort, runtime, antenna behavior and charging. Validate owner-only ringing before any network finding study.
Planned

        Download the Locket lab kit
        Get the engineering brief
        Get the capture policy source
        Download the pitch deck

The bench plan uses the Zephyr microphone sample as a starting point. Omi’s firmware provides a reference for wearable streaming and project structure.

A DeepSeek intent adapter scored 12 of 25 synthetic holdout phrases on an included Colab T4. The base scored 5. The adapter remains a lab experiment. Download the evaluation or run the base model on a computer.
